Application:
Molding material, with excellent stress cracking resistance, mainly used for lining of pipe and valve.
Technical index
NO. |
Item |
Unit |
Value |
Test Method |
1 |
Melt Flow Rate(MFR) |
g/10min |
0.8-2.0 |
ASTM D2116 |
2 |
Breaking Strength ≥ |
MPa |
27.0 |
ASTM D638 |
3 |
Elongation ≥ |
% |
320 |
ASTM D638 |
4 |
Melting Point |
℃ |
265±10 |
ASTM D3418 |
5 |
Specific Gravity |
/ |
2.12-2.17 |
ASTM D792 |
6 |
Dielectric Constant(106Hz) ≤ |
/ |
2.15 |
ASTM D150 |
7 |
Dissipation Factor(106Hz) ≤ |
/ |
7.0x10-4 |
ASTM D150 |
Recommended processing conditions:
Heating Temperature: 330-350℃
Heating Time: 30-180min
Pressure-holding Time: 5-20min
Cooling Time: 5-10min
It is corrosive to most metals, and anti-corrosion materials are suggested for the extruding machines,such as:HAC-276
Package:It is packed in PE bag and put in paper drum or in double-layer reinforced plastic bag, net wt. 25kgs/package.
Storage:Stored in clean, cool and dry places; avoid direct sunlight, moisture and dust.